لتحديد كمية الدِهان المطلوبة، نقسم مساحة السطح على معدل التغطية لكل لتر ثم نضرب النتيجة في عدد الطبقات المطلوبة.
بناءً على المنتج، سنقترح عليك عدد الطبقات التي ستحتاجها.
نوصي بهذا العدد من طبقات الدهان لضمان الحصول على أفضل النتائج.
7 أيام وقت الجفاف الكامل
معدل التغطية: 1.1 m2 per liter Recommended to use where solar reflectivity properties and exceptional waterproofing are required on horizontal and slope variety surfaces of steel, galvanised steel, concrete, cement tiles, polyurethane foam and butiminum surfaces, for roof of steel structures, warehouses, commercial buildings, residential buildings and service facilities.
• For steel and galvanized steel:
* Apply one coat of "Jazeera Cool Roof" thickness 75µ as a primer after thinning (10-15) % water using airless spray
* Install "Jazeera Titex T-325" by using "Jazeera Cool Roof" on steel sheets joint which in the path of drainge water.
* Apply 2 coats of "Jazeera Cool Roof " 500µ by airless spray.
• For cement tiles and concrete surfaces:
* Apply one coat of "Jazeera Cool Roof" thickness 75µ as a primer after thinning (10-15) % water using roller.
* Install "Jazeera Titex T-325" by using "Jazeera Cool Roof" on corners, cracks of concrete surfaces , pipes and drainage.
* Apply 1 coat of "Jazeera Cool Roof" 500µ by roller after that install "Jazeera Titex T-325" then Apply another coat of "Jazeera Cool Roof"
500µ by roller and continue for full area.
• For polyurethane foam and butiminum surfaces:
* Install fabric mish by using "Jazeera Cool Roof" on corners and big holes.
* Apply 2 coats of "Jazeera Cool Roof" 500µ by roller.
Airless spray:
Roller :
Brush:
